How To Canon PIXMA MX492 Wireless Printer Setup?
![Canon PIXMA MX492 Wireless Printer Setup](https://www.canonprintersupportpro.us/blog/wp-content/uploads/2019/07/Canon-PIXMA-MX492-Wireless-Printer-Setup.jpg)
The Canon pixma MX492 wireless printer setup is a compact printer for home and office use. You have to set it up properly after you purchase the printer from the supplier. Configure your printer’s hardware and software step-by-step as prompted. Firstly, unpack the printer from the box and then settle it down at one preferable place. You can also make a direct connection with Canon Support team for getting effective and reliable guidelines of printer setup wirelessly process. The team of techies are extra-talented and well-educated so within a short span of time you will get handy ways to setup your Canon printer.
Methods To Canon PIXMA MX492 Wireless Printer Setup
Go through the below-noted instructions step-wise to setup your Canon PIXMA MX492 Wireless Printer in an effortless manner. Just have a look at those points:
Method 1: Canon PIXMA MX492 Printer Setup
Before starting the ways of setup your canon printer, you need to follow the below things appropriately:
- Be assure that the printer box is sealed properly
- Now, open the box and check if the printer components are provided in it
- Take out the Canon Pixma MX492 printer from the box and then place it on a flat surface
- Remove the protective cover from the printer
- Peel off the orange colored protective tapes
- Take the power cable provided in the printer package and then connect it to the respective port of the printer & power supply
- Power on the printer by pressing its power button forcefully
- Configure the settings on the control panel of the printer
- Unpack the ink cartridges and insert into the corresponding slots
- Load the A-4 size paper into the input tray
- Install the printer software on your computer and complete the first time Canon PIXMA MX492 setup printer
Method 2: Steps To Setup a Canon PIXMA MX492 Wireless Printer
One of the best ways to connect your Canon Pixma MX492 printer and computer is the wireless link. The following subjects explain the simple and fast procedure for setting up the wireless link on the Canon Pixma MX492 printer. Have a glimpse on the noted points and perform the same:
- On the function panel of the Canon Pixma MX492 printer, click on the “Setup” button
- Use the arrow buttons and select Wireless LAN Setup
- Now, click “OK”
- Download the updated version of the Canon Pixma MX492 printer driver that suits your windows operating system
- Set the connection method as a Wireless LAN connection
- Enable the radio button of Connect Via Wireless Router
- Follow the provided on-screen instructions and complete the wireless connection on the Canon Pixma MX492 printer hassle-freely
Call At Canon Support Number For Printer Repair
If any kind of problem can faced by you while carrying out these above noted instructions, then immediately place a call at Canon Support Number and stay connected with top-most technicians. They will proffer you desired solution in no time. Hence, be in touch with them and achieve instant troubleshooting methods at an affordable cost.